CarWell CP90

Vehicle Wash/Application Procedures

CARC Vehicle Wash Procedures - Carwell Rust Inhibitor CP-90 is a recommended and approved corrosion CPC product used on vehicles. The Carwell CP-90 product, in addition to its conventional areas of benefits (seams, joints, dissimilar metals, internal cavities, flash rust control), can be used on vehicles and equipment for line of sight applications for ocean transportation, long-term storage or any other situation that is in highly corrosive areas. It is not necessary to apply Carwell to the rubber, fiberglass or Kevlar composites.

DIRECTIONS
After Carwell CP-90 is applied to a vehicle, the vehicle should be
allowed to cure for a minimum period of 48 hours and then any excess product should be washed off.

For washing and removal of Carwell, consider the following:

1. Use an environmentally approved biodegradable mild degreaser such as VPW SC-1000, SC-Aircraft & Metal Cleaner, or All Clean.
2. Use water temperatures between 100 - 200 F.
3. Use pressure washer capable of 2000 to 3500 psi.
4. Pressure washer tip should be kept 18 inches away from surface.
5. For instances where pressure washers cannot be utilized, wipe down throughly.

If uncertain as to the necessity of washing the vehicle, usually wash:

1. After shipments arrive at their port of destination.
2. After long term storage.
3. After return from a maintenance motor pool.

Following this procedure maximizes readiness and reduces O/S costs, while ensuring the CARC service is well within all guidelines as per ARL’s reporting.

SURFACE REPAINTING
To repaint an exterior surface after Carwell has been applied, clean the surface with a preparation solvent as usual. Prime within 1 to 2 hours before Carwell is allowed to creep and return, then top-coat as per paint manufacturer’s directions and then re-apply the Carwell product.

WHEN TO APPLY
1. Every six (6) to nine (9) months - in corrosion prone environments such as coastal or heavy industrial areas
2. Yearly - in the Rust Belt (Northeast U.S.)
3. Every two to three years - West & South
4. As required to corroded vehicles
5. Immediately after exposure to extreme environmental factors such as salt water wash, acid bath, sandstorm, etc.