Aluminator
Non-Fluoride Aluminum Oxide Remover and Aluminum Brightener
Aluminum is light, strong and when it’s clean, beautiful. It doesn’t take long for exposed aluminum to lose its original finish and become dull and dingy. Until now keeping aluminum looking its best has been a labor-intensive chore, but with Aluminator aluminum brightener from Orison Marketing, the job just got a lot easier.
Aluminator cleans and brightens unfinished aluminum* without heavy buffing or polishing. Use it as part of your regular maintenance schedule to prevent the buildup of surface corrosion and keep aluminum parts looking new. Aluminator is a mild surface etching acid solution designed to reduce the need for tedious hand buffing. Spray on an even coat of Aluminator and when the part is clean, simply rinse with clear water to stop the etching process. Used alone, or as a pre-treatment for more detailed polishing, Aluminator is perfect for removing road film, diesel smoke, watermarks, brake dust, and oxidation from any unprotected aluminum surface. Also works great on tires / whitewalls!
OUTSTANDING BENEFITS AND FEATURES:
- Works as Spray or Soak
- Replaces Harsh / Hazardous Acids
- Non-Fluoride
- Water soluble
- Mild acidic pH (3-4)
- Non-Flammable
- Biodegradable
Compatibility Table
Aluminator is a mild surface etching acid solution. Prolonged exposure (soaking) can increase the risk of damage to different parts/materials. The chart below shows the compatibility of different materials with Aluminator.
Excellent = no adverse effects expected
Good = Minor Effect, slight corrosion or discoloration can occur with prolonged exposure
Watch Closely = Moderate Effect, softening, loss of strength, swelling may occur. Not recommended for continuous use
| EXCELLENT | GOOD | WATCH CLOSELY |
|---|---|---|
| ABS Plastic | Aluminum | Acetal |
| Bronze | Stainless Steel | Brass |
| Carbon Graphite | Silicone | Buna N (Nitrile) |
| Ceramic Al203 | Titanium | Carbon Steel and Cast Iron |
| CPVC | Copper | |
| EPDM | Polyurethane | |
| Epoxy | Tygonr | |
| Hastelloy-Cr | ||
| Natural Rubber | ||
| Neoprene | ||
| Nylon | ||
| Polycarbonate | ||
| Polypropylene | ||
| PVC | ||
| VitonR |
NOTE*
This product is a buffered "safe" acid based aluminum brightener, designed for clean, unfinished (bare) aluminum. Not all aluminums are the same. Many things are manufactured with different alloys and even coatings mixed into the aluminum which, in effect, can block Aluminator.
Aluminator is not a "cleaner", it is formulated for etching aluminum surfaces and removing oxidation, road film, scum, diesel smoke, and water marks. The quick penetration and etching action reduces the need to rub, buff or agitate the surface being brightened.
| ***INTERNET SPECIAL*** | |||
| 1 Gallon ALR, Get 24 Oz. SC-Aircraft Metal Cleaner & 32 Oz. Empty Spray Bottle FREE. | $ 17.99 | ||
32 Oz. Spray |
ALR-32c | $ 6.95 | |
| 5 Gallon | ALR-5c | $ 80.00 | |
| 55 Gallon | ALR-55c | $ 825.00 | |
(c) Orison Marketing 2009